Home/ Questions/Q 13457
Next
In Process

askthedev.com Latest Questions

Asked: 2024-09-26T22:35:04+05:30 In:

I’m having trouble getting my Brother MFC-L8610CDW printer to work on Kubuntu 24.04. Has anyone experienced similar issues and found a solution?

I really need some help with my Brother MFC-L8610CDW printer on Kubuntu 24.04. I swear I was so excited to get everything set up, but things didn’t go as smoothly as I hoped. So here’s the deal: I’ve followed the installation instructions, but the printer just doesn’t seem to want to cooperate.

First off, I installed all the necessary drivers from the Brother website, which seemed pretty straightforward. I even double-checked to make sure I had the right version for my printer model. I thought that would be the magic fix, but every time I try to print something, it just sits there “processing” for ages and never actually does anything. It feels like it’s on a permanent coffee break or something!

I tried checking the printer settings through the CUPS web interface, and I can see that the printer is recognized. It’s listed there, but when I hit print, it just shows a blank page coming out, or sometimes an error message. It’s driving me nuts! I’ve rebooted my computer, unplugged and plugged the printer back in, and even tried a different USB port, but still nothing.

I’ve seen some forum posts where people had similar issues, but the solutions seemed to lead to more confusion. Some suggested using different drivers or looking into network settings, but I’m not sure if I should go that route. Am I supposed to be using the drivers from Brother directly, or is there an open-source alternative that works better for this model on Kubuntu?

I’m not super tech-savvy, so if you’ve got any tips or tricks that helped you get your Brother printer working, I’d really appreciate it. Has anyone out there successfully set up their MFC-L8610CDW on Kubuntu 24.04? If so, what steps did you take? I’m all ears! I just want to be able to print without tearing my hair out. Any help would be super appreciated!

Share

    Leave an answer

    You must login to add an answer.

    Need An Account,

    2 Answers






    1. Brother Printer Help for Kubuntu 24.04


      Getting Your Brother MFC-L8610CDW Working on Kubuntu 24.04

      Understandably, dealing with printer issues can be super frustrating! Here are some tips that might help you get your Brother MFC-L8610CDW printer operating smoothly on your Kubuntu setup.

      1. Recheck Driver Installation

      First off, make sure that you have the right drivers installed. It’s good that you checked that part! For Brother printers, they often have specific drivers that work best. Sometimes, even if you think you’ve installed the right one, it might be worth uninstalling and reinstalling to start fresh. You can find the official drivers on the Brother support page.

      2. Check Printer Connection

      If you’re using a USB connection, try using a different cable if you have one. Sometimes, cables can be a little fussy. If you’re connecting over the network, ensure the printer is connected to the same WiFi as your computer.

      3. CUPS Configuration

      Since you’ve already checked the CUPS web interface, ensure you select the correct printer options. Sometimes it defaults to a wrong setting that could cause blank pages. You can access CUPS at http://localhost:631. Look for the “Printers” section and make sure the printer is set to the correct driver.

      4. Test Print Page

      You can also try printing a test page directly from CUPS to see if it outputs anything correctly. This option is usually found in the printer settings.

      5. Alternative Drivers

      If the original drivers aren’t working, you can look into using Open Source drivers. Sometimes these work better with certain configurations. One soft option is brlaser, which supports Brother laser printers. You can install it using:

      sudo apt install printer-driver-brlaser

      After installing, go and set your printer to use this driver in CUPS.

      6. Network Printer Settings

      If you’re trying to connect over the network, make sure the printer’s IP address is correctly set up. You can typically find this info in the printer’s menu or on a status printout.

      7. Get Help!

      Forums can be really helpful! Check out places like Ubuntu Forums or Ask Ubuntu. There, people can share their experiences with your specific printer model.

      Hope these tips help you out! It can take a bit to figure things out, but don’t lose hope. Happy printing! 😊




    2. Help with Brother MFC-L8610CDW Printer on Kubuntu 24.04

      To troubleshoot your Brother MFC-L8610CDW printer issues on Kubuntu 24.04, first ensure that the drivers you installed are indeed the appropriate ones for your specific model and version of the OS. Sometimes, the official driver package may not be the best option due to compatibility issues. A common solution is to switch to the open-source OpenPrinting drivers. You can install them by running the command sudo apt install printer-driver-brlaser in the terminal. After installation, revisit the CUPS web interface at http://localhost:631, and make sure your printer is set as the default printer and connected properly. Check on configuration settings, including making sure you’ve selected the correct driver from the list.

      If the issue persists, investigate the printer’s connection method. Since you’re using a USB connection, ensure that the cable is functional. Alternatively, consider setting up the printer on your network using Wi-Fi for a more stable connection. You may want to reset the printer and reconfigure it, making sure to delete any previous instances from the printers list in CUPS. Lastly, ensure that your firewall settings aren’t blocking any `CUPS` communication. A test print after each step can provide immediate feedback on progress. If all else fails, check online forums specific to your model for insights, as other users might have faced similar situations and shared their solutions.


    Related Questions