Home/ Questions/Q 6799
Next
In Process

askthedev.com Latest Questions

Asked: 2024-09-25T13:58:09+05:30 In:

How can I create a USB drive that is bootable using the Hiren’s Boot CD ISO on an Ubuntu system?

I’ve been trying to figure out how to create a bootable USB drive with Hiren’s Boot CD ISO on my Ubuntu system, and I could really use some help. I’ve got this older laptop that needs some TLC, and I think Hiren’s Boot CD could really do the trick since it has all those useful tools for recovery and diagnostics.

So here’s the deal: I’ve downloaded the ISO file, but now I’m completely stuck on how to actually make that USB drive bootable. I’ve heard people mention several different methods, but I’m not sure which one is the best or what tools I need. I’ve seen some tutorials that mention using the terminal, while others talk about graphical applications. I’m comfortable in the terminal, but I wouldn’t mind an easier graphical option if it exists.

I’ve tried using some tools like UNetbootin before, but for some reason, it didn’t work well with Hiren’s. I think it might have something to do with how bootable images like Hiren’s require to be set up differently compared to typical Linux distributions, or maybe I just didn’t do something correctly. I really want to avoid bricking my USB drive or getting it into some unbootable state.

So, can anyone share a step-by-step guide or some tips on how to properly create a bootable USB drive using this specific ISO? Bonus points if you can suggest any specific commands or tools to use without running into errors! I’m open to any advice, whether it’s using the command line or a program, as long as it gets the job done. It would really mean a lot to me if someone could walk me through this. Thanks in advance, everyone!

Share

    Leave an answer

    You must login to add an answer.

    Need An Account,

    2 Answers



    1. Creating a Bootable USB Drive with Hiren’s Boot CD on Ubuntu

      To create a bootable USB drive with Hiren’s Boot CD ISO on your Ubuntu system, you can follow these steps using the terminal, which is both straightforward and reliable. First, ensure you have the ISO file downloaded and your USB drive connected. Open a terminal and identify your USB drive using the command lsblk to list all block devices. Once you’ve identified your USB drive (e.g., /dev/sdX), unmount it if it’s mounted using sudo umount /dev/sdX1 (replace /dev/sdX1 with the appropriate partition). Then, use the dd command to write the ISO to the USB drive with the following command: sudo dd if=/path/to/hirens.iso of=/dev/sdX bs=4M status=progress && sync. This command will copy the ISO to the USB drive; ensure the of parameter points directly to the device and not a partition.

      If you prefer a graphical option, you might want to use GParted and Startup Disk Creator or Balena Etcher. GParted allows you to format your USB drive in FAT32, while Startup Disk Creator provides a straightforward interface to create bootable drives. Install them if they are not already on your system by using sudo apt install gparted usb-creator-gtk or sudo snap install balena-etcher for Balena Etcher. Once installed, open GParted, select your USB drive, and format it to FAT32. After that, open Startup Disk Creator or Balena Etcher, select the ISO, choose your USB drive, and click ‘Create’. This method could be simpler and may help avoid issues that you’ve encountered with tools like UNetbootin. Remember to double-check your device paths to avoid overwriting important data.




    2. Create Bootable USB with Hiren’s Boot CD ISO on Ubuntu

      How to Create a Bootable USB Drive with Hiren’s Boot CD ISO

      So, you want to make a bootable USB with Hiren’s Boot CD on your Ubuntu machine? No worries, I’ve got you covered! Here’s a simple step-by-step guide to help you out.

      Option 1: Using the Terminal

      If you’re comfortable with the terminal, this is probably the most straightforward method.

      1. Plug in your USB drive. Make sure to back up any important data on it because it’ll be formatted!
      2. Open Terminal. You can do this by searching for “Terminal” or pressing Ctrl + Alt + T.
      3. Find your USB device’s name. Run this command:

        4. lsblk

        Look for something like /dev/sdb. It might be different, so pay attention!

      4. Unmount the USB drive. If it’s mounted, use:

        5. sudo umount /dev/sdb1

        (Replace /dev/sdb1 with your actual device name.)

      5. Write the ISO to the USB drive: Use the dd command, but be super careful! This can wipe drives if you mess up. Here’s the command:

        6. sudo dd if=/path/to/hirens.iso of=/dev/sdb bs=4M status=progress && sync

        Again, replace /path/to/hirens.iso with the path to the ISO file you downloaded and /dev/sdb with your USB device name.

      6. Wait for it to finish. This might take a minute, just be patient!

      Option 2: Using a Graphical Tool

      If you prefer a GUI tool, you can use Gnome Disks (sometimes called Disks).

      1. Open Gnome Disks. Search for “Disks” in your applications.
      2. Select your USB drive. Make sure it’s the right one!
      3. Click on the gear icon and choose Format Disk… to format your USB (choose FAT filesystem).
      4. Click on the “Play” button. Select Create Disk Image… and point it to the Hiren’s ISO file.
      5. Finish up! Confirm everything and let it do its thing. It should create the bootable USB for you.

      Troubleshooting

      If things don’t work out, make sure:

      • Your USB drive is intact and not corrupted.
      • You double-check the commands and paths you’re entering.
      • You try a different USB port or another USB drive if problems persist.

      And that’s it! You should have a bootable USB drive with Hiren’s Boot CD ready to go. Good luck with your older laptop!


    Related Questions