Home/ Questions/Q 3368
Next
In Process

askthedev.com Latest Questions

Asked: 2024-09-24T15:19:11+05:30 In:

What steps should I follow to mount an ext4 RAID1 partition from an Asustor NAS on my Ubuntu system?

I’m in a bit of a jam and could really use some help with mounting an ext4 RAID1 partition from my Asustor NAS on my Ubuntu system. I’ve been trying to figure this out for a couple of hours, and I think I’m overcomplicating things or missing some crucial steps. Here’s the lowdown:

I have this Asustor NAS set up with RAID1, and I’ve got some important files stored on it. The NAS is working fine, and I can access it through its web interface without any issues. The RAID is configured as ext4, and I want to mount this partition on my Ubuntu machine to access my data directly from there. I’m thinking it should be straightforward, but it feels a bit daunting, especially since I want to make sure I don’t mess anything up or cause any data loss.

I’ve done some research, and I know I need to find the right mount point, but I’m not sure how to navigate through the NAS to get the proper identifier for the RAID1 partition. Also, I’ve heard something about needing to install certain packages or using specific commands in the terminal, but the instructions I found seem a bit scattered—definitely not user-friendly.

Can someone outline the steps I should take? Like, do I need to mount it via the terminal or can I do it graphically somehow? And, what’s the best way to ensure that my Ubuntu system recognizes the NAS? Are there any specific commands I should run, or configuration files I need to modify?

I really want to do this right so any detail you can provide would help. From the command-line commands to any potential pitfalls I should avoid, I’m all ears. If there’s something I should be particularly cautious about, please let me know. It’d be awesome to finally get this sorted out! Thanks in advance for all your help!

Share

    Leave an answer

    You must login to add an answer.

    Need An Account,

    2 Answers


    1. To mount your ext4 RAID1 partition from your Asustor NAS on your Ubuntu system, you’ll first want to ensure that your Ubuntu machine can communicate with the NAS over the network. Begin by installing the necessary packages for accessing network shares if you haven’t already done so. You can do this by executing the following command in your terminal: sudo apt update && sudo apt install nfs-common cifs-utils. Once the packages are installed, you’ll need to identify the network address of your NAS. You can usually find this in the NAS’s web interface. Take note of the format, which generally looks like \\NAS_IP_ADDRESS\shared_folder or similar. If your NAS supports SMB/CIFS, you can proceed with mounting using that protocol.

      Next, create a mount point on your Ubuntu system by running sudo mkdir /mnt/nas. After that, you can mount the NAS to the created directory using the appropriate command. If using CIFS, the command would look like this: sudo mount -t cifs //NAS_IP_ADDRESS/shared_folder /mnt/nas -o username=your_username,password=your_password. Be cautious with your username and password to avoid exposing sensitive information. Alternatively, if your NAS supports NFS, use the following command instead: sudo mount -t nfs NAS_IP_ADDRESS:/shared_folder /mnt/nas. After successfully mounting, you can access your files directly through /mnt/nas. Remember to unmount the NAS before shutting down or disconnecting by using sudo umount /mnt/nas. Regularly check your filesystem and network configurations to avoid data loss or inconsistencies due to unexpected disconnections.




    2. Mounting ext4 RAID1 Partition from Asustor NAS on Ubuntu

      How to Mount Your Asustor NAS RAID1 Partition on Ubuntu

      No worries! Mounting your RAID1 NAS partition on Ubuntu can seem tricky, but it’s definitely doable. Here’s a step-by-step guide to help you out.

      1. Prerequisites

      • Make sure your NAS is powered on and connected to the same network as your Ubuntu machine.
      • Check that you have cifs-utils installed. You can install it by running: 
        sudo apt update
sudo apt install cifs-utils

      2. Find Your NAS IP Address

      Since you can access it through the web interface, you probably already know the IP address. If not, you can check your router’s device list for something like Asustor.

      3. Create a Mount Point

      Choose a directory where you want to mount the NAS. You can create a directory using:

      sudo mkdir /mnt/asustor

      4. Mount the NAS

      Use the following command to mount the NAS. Make sure to replace YOUR_NAS_IP with your actual NAS IP and YOUR_SHARE_NAME with the name of the shared folder you want to access:

      sudo mount -t cifs //YOUR_NAS_IP/YOUR_SHARE_NAME /mnt/asustor -o username=YOUR_USERNAME,password=YOUR_PASSWORD,iocharset=utf8

      Note: If you don’t want to put your password in the command, you can use a credentials file instead. Create a text file ~/.nas-credentials:

      echo 'username=YOUR_USERNAME' > ~/.nas-credentials
echo 'password=YOUR_PASSWORD' >> ~/.nas-credentials

      Then, use this file in your mount command:

      sudo mount -t cifs //YOUR_NAS_IP/YOUR_SHARE_NAME /mnt/asustor -o credentials=/home/YOUR_USER/.nas-credentials,iocharset=utf8

      5. Verify the Mount

      To check if it’s mounted correctly, run:

      df -h

      If you see your mount point listed in the output, congrats! You’re in!

      6. Automate the Mounting (Optional)

      If you want your NAS to mount automatically on boot, add the following line to your /etc/fstab file:

      //YOUR_NAS_IP/YOUR_SHARE_NAME /mnt/asustor cifs credentials=/home/YOUR_USER/.nas-credentials,iocharset=utf8 0 0

      Be careful editing fstab; if there’s an error, it can prevent your system from booting properly!

      Cautionary Notes

      • Always ensure your data is backed up before messing around with mounts!
      • Check permissions on your NAS shares; you might need admin rights to access certain folders.

      That’s pretty much it! You should now be able to access your files on your NAS. Good luck, and happy file sharing!


    Related Questions